How to make a plastic slide slippery

Hey there! Do you have a plastic slide that isn’t slippery enough? Well, you're in luck!, we’ll even demonstrate some really simple and fun ways on how to make your plastic slider super slick so that you can keep thing fun while sliding around. So, let's get started!

Spraying the plastic slide surface with lubricant:

You can get your plastic slide super slippery by spritzing it with a can of lubricant spray. A lubricant spray is a liquid that you’re using to help minimise friction between two items, giving them the ability to slide more easily against each other. To use the lubricant spray, just spray it on the plastic slide and wipe it with a cloth to distribute. Be sure to follow the instructions on the spray bottle for optimum success.

Put water or soap on the slide for a slippery surface:

Another entertaining way to make your plastic slide slip-and-slidey is by wetting down or soaping up the surface. Being very wet and soapy on a slippery surface takes you sliding on the slide to a whole new level of fun! To achieve this, a splash of water or soap can be easily doused on the slide, and then be spread by cloth or sponge. You can also get an extra slick ride by using a hose to wet the slide before sliding down.

Coating of the slide with silicone gel to make slippery:

Silicone gel is another excellent choice to make your plastic slider zipper super slick. Silicone gel is a lubricant and can coat the slide to allow patients to slide down more easily. Silicone gel: You just put a dab of it on the slide and wipe a cloth over the slide. (But be careful not to use too much, or the slide may become too slippery.

Buffing the smooth cloth on the plastic slide for a slidey wax finish:

If you’d like to make your plastic slide even slicker, you can consider polishing it with a smooth cloth. If you want to add some contrast to the face side (the wearable side) you can also rub a little bit of polish on the face.Canter in revive the surface, decrease friction and easy slide down. If you want the slide bright, just gently use any clean, lint-free cloth, rubbed in a circular motion over it. Be sure to sand out any rough spots or ripples for an ultra-smooth finish.

Dusting the slide with baby powder or cornstarch to minimize the friction and make the slide more slippery:

One final fun method for making your plastic sliders extra slippery is sprinkling baby powder or cornstarch on its surface. Baby powder and cornstarch will also help to eliminate the friction between the slide and your skin, making it easier for you to slide down, without breaking your fanny. Just add a little bit of baby powder or cornstarch on the slide, distribute it properly and voilà! You may also want to consider mixing the powder with water for an even slicker surface.

How to make plastic slide slippery? 

There are several interesting and easy methods to make plastic slide super slippery. Whether you should spray lube, H2O or soap, silicone gel, wax the surface, or sprinkle baby powder or corn starch, you will experience hrs of fun on your slide. So grab your friends and family, get outside, and prepare for hours of slick-sliding fun with Zili.